How to Burn SERAX Candles for Longer Lasting Fragrance
By Cutipol: The Shape of Tomorrow’s Cuisine | Official Store | Published: 2026-10-22
Category: Tips & Care
Learn practical steps to extend the burn time and fragrance throw of your SERAX scented candles, from the first burn to proper storage and trimming.
Quick Answer
To get the longest lasting fragrance from your SERAX scented candle, always allow the wax to melt fully across the surface on the first burn, trim the wick before each use, and keep the candle away from drafts.
Why the first burn matters
The first time you light a candle sets the pattern for how it will burn. If the flame goes out before the entire top layer of wax has melted, a tunnel forms around the wick. That trapped wax never catches up, and you lose burn time and fragrance throw.
SERAX candles like the Encensoir scented candle are designed with a generous wax pool, so giving them a solid initial burn helps the fragrance oils release evenly from the start.
The trade-off between burn time and fragrance throw
A longer burn time often means a cooler flame, which can reduce how strongly the scent fills a room. If you want a more intense aroma, you might burn the candle in a smaller space or use a candle warmer—but that changes the burn characteristics.
For most rooms, a steady, even burn gives the best balance between longevity and fragrance. The Encensoir candle, with its 95-hour burn time, is a good example of a candle that rewards patience.
Step-by-Step Candle Care for Longer Fragrance
- First burn: let the wax melt edge to edge: Light the candle and let it burn until the entire top layer of wax is liquid, reaching the edges of the container. This may take 2–4 hours for larger candles. Avoid extinguishing before this point. If you see a ring of unmelted wax, relight and let it burn longer next time.
- Trim the wick to about 1/4 inch before each light: Use a wick trimmer or scissors to cut the wick to roughly 6 mm. This prevents a tall, smoky flame and keeps the burn even. A clean, short wick also reduces soot on the glass or lid.
- Burn in sessions of 3 to 4 hours: After the first burn, light the candle for no more than 3–4 hours at a time. This prevents overheating, which can cause the fragrance to dissipate too quickly or the wax to discolor. If you need a longer session, extinguish, let it cool, trim the wick, and relight.
- Keep the candle away from drafts and vents: Place the candle on a flat, heat-resistant surface away from open windows, air conditioners, or ceiling fans. Drafts cause uneven burning and can decrease the fragrance throw. A stable environment helps the wax pool stay level and the scent to spread consistently.
- Extinguish properly and store with the lid on: Use a snuffer or dip the wick into the wax to extinguish, then straighten the wick. Once cool, replace the lid to keep dust out and preserve the fragrance between burns. Avoid blowing out the candle, as it can cause smoke and disturb the wax pool.
Product Facts
- SERAX Scented Candles - Candle Encensoir ivory L: The SERAX Encensoir scented candle by Bela Silva has a burn time of up to 95 hours and blends carnation, geranium, and white flowers in a lidded pot. That long burn window means you can enjoy the fragrance for many evenings, but only if you follow the right burning habits from the start.
SERAX Scented Candles - Candle Encensoir ivory L
By following these steps, you'll get the most from your SERAX candle's 95-hour burn time and enjoy a consistent, long-lasting fragrance. Remember to always burn within sight and keep the candle away from flammable materials.
